Make sure the flow-control (on your hyperterminal) is set to NONE, and not HARDWARE.
Hth, Ole ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.RouterChief.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Mike Dickson [mailto:[EMAIL PROTECTED]] Sent: Monday, March 04, 2002 8:47 AM To: [EMAIL PROTECTED] Subject: 2501 console port doesn't respond to reverse telnet connection [7:37150] I have a 2501 router whose console (and aux) port doesn't respond when connected to a 2511 and accessed via reverse telnet. The 2511 reports the connection is open, but I never get back a prompt from the 2501. The console port works when directly connected to the serial port of my laptop. Also, I've switched cables between the problem 2501 and other routers in my lab, and the problem follows the 2501, not the cable nor the line on the 2511. I've tried the 'clear line #' command, but it doesn't help. Any ideas? TIA Mike Dickson MCSE+Internet, MCDBA, CCNP, CCDP Dickson Network Designs voice (512)-422-3192 fax (512) 394-0320 www.dicksonnetworks.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37161&t=37161 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
