You will need the updated IOS for this GBIC. Being a newer GBIC, the older IOS won't recognize it so run the upgrade and it will work. To confirm this, type "sh int g0/1" (g0/2, etc..) and the output will tell you if the GBIC is recognized or not.
Rik -----Original Message----- From: Chuck Collins [mailto:[EMAIL PROTECTED]] Sent: Monday, March 04, 2002 8:22 AM To: [EMAIL PROTECTED] Subject: RE: Catalyst 3508G XL , 2950T-24 [7:37098] I wouldn't upgrade the IOS. We had a 3550 that was doing the same thing (GBIC not blinking at all). We called into TAC and got a replacement. We did the upgrade first and when the switch would boot it would no recognize the Ethernet controller. It may be different for you since you have a 3508. I guess you would need to ask yourself "do I feel lucky?" Good Luck, Chuck Collins -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Sunday, March 03, 2002 10:33 AM To: [EMAIL PROTECTED] Subject: Catalyst 3508G XL , 2950T-24 [7:37098] Dear all I need clarification regarding these two points thanking your help in proceed, First point: We have Catalyst 3508G XL , 8 GBIC slots , 12.0(5.2)XU IOS software. We tried to make operate it but the GBIC was not blinking at all , as I had read this document http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/1000gbic/ins tnot e.htm , I got conclusion that the switches detect and enable the GBIC only when they are running the minimum software releases which in case of Catalyst 3508G XL Cisco the minimum IOS Release is 12.0(5)XW , so in order to enable the GBIC we have to upgrade the IOS software from 12.0(5.2)XU to 12.0(5)XW . Second point: we have Catalyst 2950T-24 Switch-24 10/100 ports and 2 fixed 10/100/1000BaseT uplink ports, IOS available 12.0(5.3)WC(1). As I had read this document http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/2950_wc/1169 303. htm , I got conclusion that we do not have to upgrade the ios image because the ios will support the following: Catalyst 2950T-24 24 fixed autosensing 10/100 ports and 2 fixed autosensing 10/100/1000 Ethernet ports. please tell me if there is something missing here , the equipment is placed far away from our office we need to put the network on there as soon as possible , in case we have to upgrade the ios of the any platform then please let us go ahead solving this issue. Warm regards, Ismail Al-shelh Network Engineer [GroupStudy.com removed an attachment of type application/ms-tnef] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37218&t=37098 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
