John, For Frame-Relay PVCs, you would use:
ip ospf network point-to-multipoint But for Frame-Relay SVCs or ATM SVCs, you would use: ip ospf network point-to-multipoint non-broadcast Best Regards, Hunt Lee ""John Neiberger"" wrote in message news:[EMAIL PROTECTED].; > I've been reading the CCO configuration guides and I now have a > question. What is the difference between the following: > > ip ospf network point-to-multipoint > > and > > ip ospf network point-to-multipoint non-broadcast > > ?? > > More specifically, I really want to know when you would use the latter > command. The example given on CCO is if we have excluded the broadcast > keyword from a frame relay map. I don't think I've ever seen anyone > configure a frame map without that keyword so I don't know why you'd > ever want to do that. > > Any thoughts here? > > Thanks, > John Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37227&t=37205 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]