When it is listed as "possibly down" in the route table, it is in holddown. Running v1 on 12.1 code.
""Priscilla Oppenheimer"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Can you enable debug ip routing on R2? We're trying to see if the route > goes into holddown. (At least I think that's what the problem is. The route > doesn't go into holddown on his network, it just gets deleted.) > > The easiest way to see this is with debug ip routing. You can also see more > info if you do a show ip route with the network number, i.e. show ip route > 10.0.0.0. > > What version of RIP are you using? What version of IOS? > > Thanks. > > Priscilla > > At 06:56 PM 3/6/02, Scott H. wrote: > >I set this up really quick and had it working. Here is my setup: > > > >R1----R2 > > > >R1 has a loopback w/ address 10.1.1.1 and is using the serial to get to R2. > >After the connection was up and working, I shut down the loopback on R1 and > >immediately got the following (due to the triggered update as Priscilla > >said) on R2: > > > >R 10.0.0.0/8 is possibly down, routing via 192.1.1.1, Serial0 > >C 192.1.1.0/24 is directly connected, Serial0 > > > > > >After all the timers expired, the route dropped out of the table. > > > >C 192.1.1.0/24 is directly connected, Serial0 > > > >HTH, > >Scott > > > >""Jerry P."" wrote in message > >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > When I added a network 154.1.1.0 to router r1 pinged it and shut it down > > > this is what r3 did: > > > > > > r3#debug ip routing > > > IP routing debugging is on > > > r3# > > > 05:25:49: RT: del 154.1.0.0 via 193.1.1.1, rip metric [120/2] > > > 05:25:49: RT: delete network route to 154.1.0.0 > > > > > > I have ethernet connections from r1 to r2 using a crossover cable. > > > > > > Jerry > ________________________ > > Priscilla Oppenheimer > http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37509&t=37455 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
