6.0 and Higher PIX software releases 6.0 and later and PIX Device Manager require a minimum of 32MB RAM and 8MB Flash. Some PIX 520 systems may not meet these minimum requirements, and the purchase and installation of a 128MB RAM upgrade and/or a 16MB flash card will be necessary.
-----Original Message----- From: ""[EMAIL PROTECTED] [mailto:""[EMAIL PROTECTED]] Sent: Monday, March 11, 2002 12:24 PM To: [EMAIL PROTECTED] Subject: RE: Pix 520 [7:37836] It only requires 8 mb of flash also. I am actually trying to install 6.13 not 6.2. I've also tried going just to 5.2 and get the same results. thanks -----Original Message----- From: Mark Odette II [mailto:[EMAIL PROTECTED]] Sent: Monday, March 11, 2002 9:02 AM To: Subject: RE: Pix 520 [7:37836] Jason- I might be wrong, but I think the 6.x PIX software requires the 16MB Flashcard. You might check CCO to confirm. Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Monday, March 11, 2002 1:15 AM To: [EMAIL PROTECTED] Subject: Pix 520 [7:37836] I currently am trying to upgrade a pix 520 from pix ios 4.7(7) to 6.2 and am having some difficulty or errors more like. When upgrading the pix I am using the 6.1 boothelper on the floppy to upgrade the pix. It gives me an error telling me that the pix's flash is obsolete. It then reboots the pix. I have never seen this before and have worked with plenty of pix's before. The pix runs fine with version 4.7 and has 8mb of flash for upgrade. Anybody have any ideas of what I can do to trick it possibly or a work around. Thanks, Jason Pehrson Systems Administrator Information Systems Department Naval Support Activity Naples, Italy [EMAIL PROTECTED] Work: (39) 081-568-4316 Cell: (39) 347-381-1060 Fax: (39) 081-568-5689 > [GroupStudy.com removed an attachment of type application/octet-stream which had a name of Pehrson, Jason Contractor (NSANAP N63).vcf] [GroupStudy.com removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37842&t=37836 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
