It relates to DECnet using the mac address of the interface to derive the
DECnet address.  You need to configure DECnet, then HSRP using standby
use-bia.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, March 26, 2002 8:26 AM
To: [EMAIL PROTECTED]
Subject: Bridging and HSRP [7:39525]


Greetings all,

I've a 6509 with 2 sups and MSFCs, running hsrp between both MSFCs.
Routing 5 vlans, two of those 5 vlan are also bridging decnet.  When
I've the standby interface up, users can't get out, if I shutdown the
standby interface all is good.  According to Cisco I've to enable
"standby use-bia" feature to prevent this problem.

Have you guys seen this before, and what causes this problem?  Just
looking for some education and solutions.


Thanks..................Nabil - Hope I made my problem clear!




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39531&t=39525
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to