Incorrect. Only ISL requires FastE, 802.1q works perfectly well on a standard Ethernet port. This was covered in another thread a few days ago.
-Kent -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 28, 2002 10:15 AM To: [EMAIL PROTECTED] Subject: If it's a 2611, you're out of luck [7:39788] Vlan trunking requires a fast ethernet connection. It cannot be trunked with a 261X. You'd need a 262X. If you have to deal with a 2611, your options become much more limited. You could replace the 2611 with a 2620. Or you could get a ethernet module for the 2611. Unfortunately, last time I checked (whish was a couple years ago, given) those ethernet modules came in two models, 1 and 4 port, and cost about $1000 per port. Another option would be to replace the 2611 with a 1750. It's got one fast ethernet port. If this network is as small as it sounds, it'd be a viable option. Oh, and about trunking, the way it works is you define the switch port connected to the router as a trunk. This allows multiple (in your case, all) vlans to use the one port. The router is configured with subinterfaces on the fastethernet port, one for each vlan. The router can then route between these vlans. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39827&t=39788 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
