Hi Group, Hope someone can help out with this as I don4t have access to my kit at the moment.
I tried to set up my first BGP lab last week. I configured a full iBGP mesh, three routers connected in a triangle via serial lines. I set up (neighbour( statements on each router (Hope Radia can forgive the extra vowel !!!) and advertised the networks. I got the BGP table working but nothing was promoted to the main routing table, and therefore could4nt ping non directly connected interfaces. I tried various approaches like putting a default route in and running an IGP but still no promotion to the main table. Should this be possible with iBGP ? or is it a matter of loop avoidance i.e the AS Numbers won4t be prepended for the case of iBGP peers. Phil. __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40741&t=40741 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
