Is your 2501 router booting correctly? If it is booting in rommon, then you will not be able to access the router through console with the standard settings. What you need to do is to change your baud rate to 38400, and keep increasing unless it sees it. Don't change the baud rate and then expect it will work. If it doesn't work with 38400, then close it and reopen hyper terminal with the new baud rate and so on. Believe me I have been through this.
Abbas -----Original Message----- From: Kevin Corbin [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 09, 2002 1:36 PM To: [EMAIL PROTECTED] Subject: Very Strange [7:40966] I've got a 2501, that I cannot connect directly to the console port of, however, if using the same PC, same cable, and all settings the same, I can connect fine to all of my other routers. And if I use the AUX port on another router connected via rollover cable into the console port on this 2501, it works fine w/ a reverse telnet session. Anyone ever seen this? any suggestions? Thanks, Kevin Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40970&t=40966 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
