my 2511 was working fine a few days ago with--i believe--11.0xx
software. i created a configuration and saved it. yesterday, i
upgraded the RAM so that i could load 12.2xx.
the router won't fully boot up, and it never goes into the config or
into rommon. i don't get it. again, it was working a few days ago.
unfortunately, i can't put the old chips back in b/c i overwrote them
already--ugh. i loaded up 12.2.7 onto the flash via another router and
tried to boot it up again in the 2522...
here's the output from when i start up the router, to where it hangs...
System Bootstrap, Version 11.0(10c), SOFTWARE
Copyright (c) 1986-1996 by cisco Systems
2500 processor with 14336 Kbytes of main memory
%SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be
correctly understood.
F3: 14576440+958356+908736 at 0x3000060
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(7b), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 05-Mar-02 05:10 by pwade
Image text-base: 0x030794BC, data-base: 0x00001000
cisco 2511 (68030) processor (revision M) with 14336K/2048K bytes of
memory.
Processor board ID 17604021, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
00:00:09: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:09: %LINK-3-UPDOWN: Interface Serial0, changed state to down
00:00:09: %LINK-3-UPDOWN: Interface Serial1, changed state to down
00:00:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to down
00:00:34: %LINK-5-CHANGED: Interface Serial0, changed state to
administratively down
00:00:35: %SYS-5-CONFIG_I: Configured from memory by console
00:00:35: %LINK-5-CHANGED: Interface Serial1, changed state to
administratively down
00:00:35: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0,
changed state to down
00:00:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1,
changed state to down
00:01:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(7b), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 05-Mar-02 05:10 by pwade
00:01:18: %SNMP-5-COLDSTART: SNMP agent on host Terminal_Server is
undergoing a cold start
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41414&t=41414
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
