I have a choice here, and am not sure of the load probs. Core can be a 6509 with 2 MSFC 2's/SUPII's, with an uplink to a 7206 with an OC-3 ATM PA (MM).......OR, eliminate the 7206, get a Flexwan module for the 6509 and use the same OC-3 ATM PA.
LAN side looks like this: 12 remote wiring closets, each having a 4006 with 4 48-port 10/100. Uplinks to 6509 via 1000SX GBICs (trunking). Mixed IP/IPX environment. 17 VLANS (IP and IPX), so the MSFC2's will be doing the inter-vlan routing. Route IPX on LAN with RIPv2, IPX on WAN with EIGRP. IP on WAN is OSPF.--> no choice here. WAN traffic mainly TN3270, web traffic and IPX (replication), plus OSPF routing updates. Suggestions? About a 11K savings on the non-7206 design. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41904&t=41904 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]