I the lab I am currently running 12.1.8b.E7 on the MSFC and 6.3.5 on the cat.
I currently only have a PA-4T on the flex WAN, was doing some frame relay testing. The configs are like any other router. Dave interface Serial7/0/0 mtu 1000 no ip address encapsulation frame-relay no keepalive no fair-queue ! interface Serial7/0/0.16 point-to-point ip address 70.1.1.2 255.255.255.0 frame-relay interface-dlci 16 ! interface Serial7/0/1 no ip address encapsulation frame-relay no keepalive no fair-queue ! interface Serial7/0/1.17 point-to-point ip address 71.1.1.2 255.255.255.0 frame-relay interface-dlci 17 ! interface Serial7/0/2 no ip address shutdown no fair-queue Tim Potier wrote: > > Running SRM is my choice as well. Can you point me to a Cisco documentation > site for the config of the FlexWAN. I know you configure it through the > MSFC, but looking for some examples (maybe some of your own). > > Also, what version of code have you done this with MADMAN? I see that > before 12.1(3a)E4, FlexWAN would not take advantage of redumdant MSFC's, so > in a failover case, the ATM config would not be copied over. > > Micheal...an FYI, we are still using the CatOS for switch and MSFC IOS for > MSFC. > > Thanks -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41997&t=41904 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
