Strange... it says gateway of last resort if 0.0.0.0 to network 0.0.0.0....... appears it's trying to route everything to itself so to speak...... in most examples and cases, I've seen something like this:
Gateway of last resort is 161.44.192.2 to network 198.10.1.0 Perhaps instead of using the 'ip default-network' command, simply try a static route 'ip route 0.0.0.0 0.0.0.0.0 e0' and see if that makes a difference...... Worth a shot =) Mike W. "JZ" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Here is sh ip routeRouter#sh ip route > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter > area > * - candidate default, U - per-user static route, o - ODR > P - periodic downloaded static route > > Gateway of last resort is 0.0.0.0 to network 0.0.0.0 > > 66.0.0.0/21 is subnetted, 1 subnets > C 66.27.200.0 is directly connected, Ethernet0 > C 192.168.1.0/24 is directly connected, Ethernet1 > S* 0.0.0.0/0 is directly connected, Ethernet0 > > > ""Michael L. Williams"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > When you have ths default route in place, and do a 'show ip route' what > does > > your routing table show? > > > > Mike W. > > > > "John Zaggat" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi guys/gals, > > > > > > I am using a 1605R with 2 ethernet interfaces as > > > gateway to my cable service provider. My dilemma is > > > that when I put a default route to outside NAT stops > > > working. I verified this by using a sniffer. Without > > > default route everything seems to work fine but it's > > > just bugging the hell out of me that why is it so. Can > > > some one enlighten me ? > > > Here is my config: > > > > > > Router#sh run > > > Building configuration... > > > > > > Current configuration : 939 bytes > > > ! > > > version 12.2 > > > service timestamps debug uptime > > > service timestamps log uptime > > > no service password-encryption > > > service udp-small-servers > > > service tcp-small-servers > > > ! > > > hostname Router > > > ! > > > ! > > > ip subnet-zero > > > ip name-server 66.75.160.42 > > > ip name-server 66.75.160.41 > > > ip dhcp excluded-address 192.168.1.1 192.168.1.10 > > > ! > > > ip dhcp pool INSIDE > > > network 192.168.1.0 255.255.255.0 > > > default-router 192.168.1.1 > > > dns-server 66.75.160.42 > > > ! > > > ip ssh time-out 120 > > > ip ssh authentication-retries 3 > > > ! > > > ! > > > ! > > > ! > > > interface Ethernet0 > > > ip address dhcp > > > ip nat outside > > > no cdp enable > > > ! > > > interface Ethernet1 > > > ip address 192.168.1.1 255.255.255.0 > > > ip nat inside > > > no cdp enable > > > ! > > > ip nat inside source list 1 interface Ethernet0 > > > overload > > > ip classless > > > ip route 0.0.0.0 0.0.0.0 Ethernet0 no ip http server > > > no ip pim bidir-enable > > > ! > > > access-list 1 permit 192.168.1.0 0.0.0.255 > > > no cdp advertise-v2 > > > no cdp run > > > ! > > > line con 0 > > > line vty 0 3 > > > login > > > line vty 4 > > > password cisco > > > login > > > ! > > > end > > > > > > ===== > > > JZ > > > [EMAIL PROTECTED] > > > > > > > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Yahoo! Health - your guide to health and wellness > > > http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42769&t=42762 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
