which 2900 series. If you are trying to trunk with a router , you will need a fast ethernet on the router. If it's IOS based the command is : switchport access vlan 100 switchport mode access
You can enter the vlan info in the vlan database by typing vlan database vlan 100 name Engineering If it's set-based CLI the command is : Set trunk 1/1 and if you are using a router (must have fast ethernet) in the Fast ethernet interface type encapsulation isl Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44125&t=44092 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]