I believe a 2500 series can act as a router for dot1q trunking. While 10mb isnt recommended because of overhead, it should work in a lab environment to gain experience with trunking.
----- Original Message ----- From: "Marco Gaona" To: Sent: Monday, May 13, 2002 8:48 PM Subject: RE: 2900 series swithc [7:44092] > which 2900 series. If you are trying to trunk with a router , you will need > a fast ethernet on the router. If it's IOS based the command is : > switchport access vlan 100 > switchport mode access > > You can enter the vlan info in the vlan database by typing > vlan database > vlan 100 name Engineering > > If it's set-based CLI the command is : > > Set trunk 1/1 > and if you are using a router (must have fast ethernet) in the Fast > ethernet interface type > > encapsulation isl Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44160&t=44092 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]