Thanks all for those who responded. I really appreciate for each one of your responses and I got a real understanding from each ones answer.
Thanks once again. Rajesh Rajesh Kumar wrote: > Hi all, > > CCIE Practical studies - Vol I book - EIGRP chapter says that the > bandwidth command used in serial interfaces should be set to a value > equal to the remote port speed to which the serial interface is > connected to. > > For ex : > > RTR 1 ---------------------------------- RTR 2 > > 1.544 Mbps 64 Mbps > > int > s0 int s0 > bandwidth 64 > bandwidth 1544 > > My question is - Is it not going to affect the other routing protocols > like OSPF where we set the bandwidth decides the cost of the outgoing > interfaces. > > Can somebody shed some light on this please? > > Thanks, > Rajesh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44155&t=44055 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
