I'm trying to force an interface to 10 MB full duplex on a 4700 router. The
docemntation for 4700 is not on cisco's site. Does anyone know the command.
Also doing a show int does not tell whether is running at half or full
duplex and the speed. Thanks in advance.
Cisco-4700#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-IS-M), Version 11.2(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1997 by cisco Systems, Inc.
Cisco-4700#sh int e1
Ethernet1 is up, line protocol is up
Hardware is Am79c970, address is 0060.471f.8b3b (bia 0060.471f.8b3b)
Description: To Internal Ethernet
Internet address is 62.119.136.65/29
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 17/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:06:34
Queueing strategy: fifo
Output queue 0/150, 0 drops; input queue 0/150, 0 drops
5 minute input rate 135000 bits/sec, 121 packets/sec
5 minute output rate 676000 bits/sec, 146 packets/sec
51738 packets input, 7410570 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 input packets with dribble condition detected
62904 packets output, 35275588 bytes, 0 underruns
0 output errors, 612 collisions, 0 interface resets
0 babbles, 0 late collision, 685 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Cisco-4700#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44844&t=44844
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
