I don't think a 4700 supports 10M full duplex.  I have one running
12.0.16 in the lab and it doesn't support it.

  The 4700 doc is on CCO though:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis4000/index.htm

  Dave

sam sneed wrote:
> 
> I'm trying to force an interface to 10 MB full duplex on a 4700 router. The
> docemntation for 4700 is not on cisco's site. Does anyone know the command.
> Also doing a show int does not tell whether is running at half or full
> duplex and the speed. Thanks in advance.
> 
> Cisco-4700#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 4500 Software (C4500-IS-M), Version 11.2(5), RELEASE SOFTWARE
(fc1)
> Copyright (c) 1986-1997 by cisco Systems, Inc.
> Cisco-4700#sh int e1
> Ethernet1 is up, line protocol is up
>   Hardware is Am79c970, address is 0060.471f.8b3b (bia 0060.471f.8b3b)
>   Description: To Internal Ethernet
>   Internet address is 62.119.136.65/29
>   MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 17/255
>   Encapsulation ARPA, loopback not set, keepalive set (10 sec)
>   ARP type: ARPA, ARP Timeout 04:00:00
>   Last input 00:00:00, output 00:00:00, output hang never
>   Last clearing of "show interface" counters 00:06:34
>   Queueing strategy: fifo
>   Output queue 0/150, 0 drops; input queue 0/150, 0 drops
>   5 minute input rate 135000 bits/sec, 121 packets/sec
>   5 minute output rate 676000 bits/sec, 146 packets/sec
>      51738 packets input, 7410570 bytes, 0 no buffer
>      Received 0 broadcasts, 0 runts, 0 giants
>      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
>      0 input packets with dribble condition detected
>      62904 packets output, 35275588 bytes, 0 underruns
>      0 output errors, 612 collisions, 0 interface resets
>      0 babbles, 0 late collision, 685 deferred
>      0 lost carrier, 0 no carrier
>      0 output buffer failures, 0 output buffers swapped out
> Cisco-4700#
-- 
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367

"Emotion should reflect reason not guide it"




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44856&t=44844
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to