Do the password recovery sequence up to copying the start up config to running, then have a look at the config related to the console port.
Post it here if necessary. Gaz ""Mohannad Khuffash"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Dear all, > I have a problem with Cisco 2509-RJ access server as follow: > When i reboot the router to it load the IOS installed in the flash, a > warning message is appear > (Configurations from version 12.0 may not be correctly under stood) > after loading, the (Press RETURN to get started) normal message is pop up > at the console, but when i press Enter nothing happen only the message ( > Press RETURN to get started) appear again. > > I thought that the problem may be from the IOS installed where it give me a > warning at the beginning, so when i tried to go to the ROMON mode to install > a new IOS (i can't reach the router through any other interface) by press > Ctrl+Break i got the following mode : > > > > > > and the only available command are > > ? > B [filename] [TFTP Server IP address | TFTP Server Name] > Load and execute system image from ROM or from TFTP server > C [address] Continue execution [optional address] > D /S M L V Deposit value V of size S into location L with modifier M > E /S M L Examine location L with size S with modifier M > G [address] Begin execution > H Help for commands > I Initialize > K Stack trace > L [filename] [TFTP Server IP address | TFTP Server Name] > Load system image from ROM or from TFTP server, but do not > begin execution > O Show configuration register option settings > P Set the break point > S Single step next instruction > T function Test device (? for help) > > Deposit and Examine sizes may be B (byte), L (long) or S (short). > Modifiers may be R (register) or S (byte swap). > Register names are: D0-D7, A0-A6, SS, US, SR, and PC > > so how can i upgrade the IOS in this mode, or is there any other method to > solve the problem. > > Thanks > -- > > > > > Mohannad N. Khuffash > Network Administrator > Palestine Telecom > Tel : 00970-09-2390509 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46299&t=46146 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
