You need to use p2p sub interfaces. ISIS and multipoint interfaces don't work together.
------------------- Mike Bernico [EMAIL PROTECTED] Illinois Century Network http://www.illinois.net (217) 557-6555 > -----Original Message----- > From: Cisco Nuts [mailto:[EMAIL PROTECTED]] > Sent: Thursday, June 13, 2002 10:26 PM > To: [EMAIL PROTECTED] > Subject: Isis in a Nbma environment?? [7:46538] > > > Hello, > > Is there a special config for isis in a FR nbma > environment....I cannot seem > to find any examples on CCO......Just configuring ip router > isis at the > intf. config mode apparently does not work....CCO does not > have much info. > on isis either..... > > Thank you for your help. > > Regards > > My config: > > interface Serial0 > bandwidth 20000 > ip address 10.1.255.6 255.255.255.252 > ip router isis > encapsulation frame-relay > frame-relay lmi-type ansi > end > > > > > > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46576&t=46538 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]