perhaps you have some configs you are willing to share?
""Karen Menpes"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > I've seemed to have found a stange issue with IPX Eigrp when running it over > a Frame Relay setup. > > Using ver 12.0(9) of IOS. > > I can see the other router's IPX network when typing in the 'show > frame-relay map' command but can't get IPX Eigrp to establish an adjacency > at all. > > I've typed in all the necessary IPX networks into the IPX EIGRP router > config and subseqently taken those networks out of the IPX router setup. > > Also, on this 'exact' same frame relay network I never had an issue with > picking up IPX/RIP routes between the DTE routers about 10 mins prior to > setting up IPX EIGRP. I run debugs and it appears that there's very little > activity from IPX EIGRP. It also seems as the IPX EIGRP if it's totally dead > but is defintely configured ! Disabled and enabled IPX Routing and > re-established the IPX ROUTING identifier but no luck at all. > > It's a very simple Frame relay setup with 3 router's and one is the FR > switch. Each connection into the switch has it's own separate serial > interface so I wouldn't expect a split-horizon issue to be the cause of the > problem. > > > Any ideas as to why IPX EIGRP does not like Frame Relay but loves HDLC ? > > Karen Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46628&t=46626 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]