hey, if they can afford that many T1's, instead of going to DS3 or frame DS3 ( with all the failover protection that could be built in ) then they sure can afford to pay for Cisco's lack of port density. :->
""nrf"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > My question is - why does it have to be Cisco? If you want edge density, > Cisco doesn't have the best solution. Try a Juniper/Unisphere ERX1440. > > Oh whoops - I forgot, I'm not allowed to mention the evil 'J' on this > NG.... > > > > ""Chuck"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > ""Chuck"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > must be nice to have so much money. these all data lines? why in the > world > > > would they not use channelized DS3 at the center? hell of a LOT > > > cheaper!!!!!!!! Your telco account manager bying a new boat this summer? > > > > > > > > > density will be a problem. 7206's with the PA-MC-8T1 cards - that will > > give > > > you 64xT1 per box. you do the math. > > > > CL: because obviously I can't :-> make that 48 T1's per box I would > > suggest a 7509 or so, but then you run into issues with too much on one > box > > and all the additinal overhead cost to provision those suckers. > > > > > > > > HTH > > > > > > Chuck > > > > > > > > > > > > > > > > > > > > > > > > ""Vajira Wijesinghe"" wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > Hi Group, > > > > > > > > I have a client who needs 188 T1 (all 1.544Mb serial lines) > terminations > > > > to be done on the central site. > > > > Network is hub and spoke fashion. > > > > Pls advise the suitable Cisco router/routers on the central site, for > > > > this purpose. > > > > > > > > Thanks. > > > > ----------------------------------------- (on postoffice) > > > > > > > > The information contained in this email is confidential and is meant > to > > be > > > > read only by the person to whom it is addressed.Please visit > > > > http://www.millenniumit.com/legal/email.htm to read the entire > > > > confidentiality clause. > > > > > > > > --------------------------------------------------------- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47970&t=47944 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
