Hey Andre, Thanks for your help thus far...Yes, all the interfaces say up/up. I have changed the router versions to 3.1 as you suggested. I still have no ip connectivity. Any other suggestions?
The routers/l1010 both have very up-to-date software, as shown below from my "sho ver". Thanks, Eddie ROUTER 1: 3600 Software (C3620-IS-M), Version 12.2(2)XT3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Compiled Wed 13-Mar-02 23:15 by shawnk Image text-base: 0x600089A8, data-base: 0x6153A000 ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) R3620-1 uptime is 1 day, 13 hours, 50 minutes System returned to ROM by power-on System image file is "flash:c3620-is-mz.122-2.xt3.bin" cisco 3620 (R4700) processor (revision 0x81) with 58368K/7168K bytes of memory. Processor board ID 20530878 R4700 CPU at 80Mhz, Implementation 33, Rev 1.0 Bridging software. X.25 software, Version 3.0.0. 1 FastEthernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 1 ATM network interface(s) DRAM configuration is 32 bits wide with parity disabled. 29K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) 8192K bytes of processor board PCMCIA Slot0 flash (Read/Write) Configuration register is 0x2182 ---------------------------------------------------- ROUTER 2: 3600 Software (C3620-IS-M), Version 12.2(2)XT3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Compiled Wed 13-Mar-02 23:15 by shawnk Image text-base: 0x600089A8, data-base: 0x6153A000 ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) r3620-2 uptime is 1 day, 13 hours, 51 minutes System returned to ROM by power-on System image file is "flash:c3620-is-mz.122-2.xt3.bin" cisco 3620 (R4700) processor (revision 0x81) with 58368K/7168K bytes of memory. Processor board ID 21963872 R4700 CPU at 80Mhz, Implementation 33, Rev 1.0 Bridging software. X.25 software, Version 3.0.0. 1 FastEthernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 1 ATM network interface(s) DRAM configuration is 32 bits wide with parity disabled. 29K bytes of non-volatile configuration memory. 32768K bytes of processor board System flash (Read/Write) Configuration register is 0x2182 ------------------------------------------------------- L1010: Cisco Internetwork Operating System Software IOS (tm) LS1010 WA3-4 Software (LS1010-WP-M), Version 11.2(10)WA3(4a), RELEASE SOFTWARE Copyright (c) 1986-1902 by cisco Systems, Inc. Compiled Thu 14-Mar-02 14:50 by integ Image text-base: 0x600108D0, data-base: 0x60436000 ROM: System Bootstrap, Version 11.2(1.4.WA3.0) [integ 1.4.WA3.0], RELEASE SOFTWARE L1010 uptime is 1 day, 13 hours, 24 minutes System restarted by reload System image file is "bootflash:ls1010-wp-mz.112-10.wa3.4a.bin", booted via bootflash cisco ASP (R4600) processor with 32768K bytes of memory. R4700 processor, Implementation 33, Revision 1.0 Last reset from power-on 1 Ethernet/IEEE 802.3 interface(s) 4 ATM network interface(s) 123K bytes of non-volatile configuration memory. 8192K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x2101 --- Andre Riscalla wrote: > > A couple of suggestions: > > 1) Verify that your ATM interfaces are up and up > which i assume you > already did. > > 2) Since your LS1010 ATM interfaces are setup with > UNI version 3.1, change > your ATM uni version on your routers to be 3.1. (The > default is 3.0). > > Please provide the IOS version you are running on > the LS1010 and on the > routers as well. > > Thanks. > > AR- > > > On Mon, 22 Jul 2002, Edward Sohn wrote: > > > Thanks for the reply, Andre... > > > > Hmmm...I was thinking the same way you did at > first, but then the book's > > configuration actually has both "atm pvc" commands > in each interface. > > Is that a typo, then? > > > > Even so, I cannot get connectivity between my > routers. Here is my "sho > > run" for the L1010 and 2 routers: > > > > L1010: > > > > Current configuration: > > ! > > version 11.2 > > no service pad > > no service password-encryption > > no service udp-small-servers > > no service tcp-small-servers > > ! > > hostname L1010 > > ! > > ! > > ip host-routing > > no ip domain-lookup > > ! > > atm address > 47.0091.8100.0000.0050.a2c6.4001.0050.a2c6.4001.00 > > atm router pnni > > node 1 level 56 lowest > > redistribute atm-static > > ! > > ! > > interface ATM12/0/0 > > no atm auto-configuration > > atm uni version 3.1 > > atm maxvp-number 8 > > atm maxvc-number 8192 > > atm maxvpi-bits 3 > > atm maxvci-bits 10 > > ! > > interface ATM12/0/1 > > ! > > interface ATM12/0/2 > > no atm auto-configuration > > atm uni version 3.1 > > atm maxvp-number 8 > > atm maxvc-number 8192 > > atm maxvpi-bits 3 > > atm maxvci-bits 10 > > atm pvc 0 121 interface ATM12/0/0 0 112 > > ! > > interface ATM12/0/3 > > ! > > interface ATM13/0/0 > > ip address 175.128.100.5 255.255.255.0 > > atm maxvp-number 0 > > ! > > interface Ethernet13/0/0 > > no ip address > > ! > > no ip classless > > ! > > line con 0 > > exec-timeout 0 0 > > line aux 0 > > line vty 0 4 > > login > > ! > > end > > > > ROUTER 1 > > > > Current configuration : 854 bytes > > ! > > version 12.2 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname R3620-1 > > ! > > ! > > ip subnet-zero > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > fax interface-type fax-mail > > mta receive maximum-recipients 0 > > ! > > ! > > ! > > ! > > interface FastEthernet0/0 > > ip address 165.128.1.1 255.255.255.0 > > duplex auto > > speed auto > > ! > > interface Serial0/0 > > no ip address > > shutdown > > clockrate 2000000 > > ! > > interface ATM1/0 > > no ip address > > no atm ilmi-keepalive > > ! > > interface ATM1/0.1 multipoint > > ip address 165.128.100.1 255.255.255.0 > > map-group ip-Pvc > > atm pvc 112 0 112 aal5snap > > ! > > router eigrp 100 > > network 165.128.0.0 > > auto-summary > > no eigrp log-neighbor-changes > > ! > > ip classless > > ip http server > > ! > > ! > > ! > > map-list ip-Pvc > > ip 165.128.100.2 atm-vc 112 broadcast > > ! > > call rsvp-sync > > ! > > ! > > mgcp profile default > > ! > > dial-peer cor custom > > ! > > ! > > ! > > ! > > line con 0 > > line aux 0 > > line vty 0 4 > > ! > > ! > > end > > > > ROUTER 2: > > > > Current configuration : 835 bytes > > ! > > version 12.2 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname r3620-2 > > ! > > ! > > ip subnet-zero > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > fax interface-type fax-mail > > mta receive maximum-recipients 0 > > ! > > ! > > ! > > ! > === message truncated === __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49390&t=49352 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
