I believe you may need to configure a pvc on ATM12/0/1
> ""Edward Sohn"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Thanks for the reply, Andre... > > > > Hmmm...I was thinking the same way you did at first, but then the book's > > configuration actually has both "atm pvc" commands in each interface. > > Is that a typo, then? > > > > Even so, I cannot get connectivity between my routers. Here is my "sho > > run" for the L1010 and 2 routers: > > > > L1010: > > > > Current configuration: > > ! > > version 11.2 > > no service pad > > no service password-encryption > > no service udp-small-servers > > no service tcp-small-servers > > ! > > hostname L1010 > > ! > > ! > > ip host-routing > > no ip domain-lookup > > ! > > atm address 47.0091.8100.0000.0050.a2c6.4001.0050.a2c6.4001.00 > > atm router pnni > > node 1 level 56 lowest > > redistribute atm-static > > ! > > ! > > interface ATM12/0/0 > > no atm auto-configuration > > atm uni version 3.1 > > atm maxvp-number 8 > > atm maxvc-number 8192 > > atm maxvpi-bits 3 > > atm maxvci-bits 10 > > ! > > interface ATM12/0/1 > > ! > > interface ATM12/0/2 > > no atm auto-configuration > > atm uni version 3.1 > > atm maxvp-number 8 > > atm maxvc-number 8192 > > atm maxvpi-bits 3 > > atm maxvci-bits 10 > > atm pvc 0 121 interface ATM12/0/0 0 112 > > ! > > interface ATM12/0/3 > > ! > > interface ATM13/0/0 > > ip address 175.128.100.5 255.255.255.0 > > atm maxvp-number 0 > > ! > > interface Ethernet13/0/0 > > no ip address > > ! > > no ip classless > > ! > > line con 0 > > exec-timeout 0 0 > > line aux 0 > > line vty 0 4 > > login > > ! > > end > > > > ROUTER 1 > > > > Current configuration : 854 bytes > > ! > > version 12.2 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname R3620-1 > > ! > > ! > > ip subnet-zero > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > fax interface-type fax-mail > > mta receive maximum-recipients 0 > > ! > > ! > > ! > > ! > > interface FastEthernet0/0 > > ip address 165.128.1.1 255.255.255.0 > > duplex auto > > speed auto > > ! > > interface Serial0/0 > > no ip address > > shutdown > > clockrate 2000000 > > ! > > interface ATM1/0 > > no ip address > > no atm ilmi-keepalive > > ! > > interface ATM1/0.1 multipoint > > ip address 165.128.100.1 255.255.255.0 > > map-group ip-Pvc > > atm pvc 112 0 112 aal5snap > > ! > > router eigrp 100 > > network 165.128.0.0 > > auto-summary > > no eigrp log-neighbor-changes > > ! > > ip classless > > ip http server > > ! > > ! > > ! > > map-list ip-Pvc > > ip 165.128.100.2 atm-vc 112 broadcast > > ! > > call rsvp-sync > > ! > > ! > > mgcp profile default > > ! > > dial-peer cor custom > > ! > > ! > > ! > > ! > > line con 0 > > line aux 0 > > line vty 0 4 > > ! > > ! > > end > > > > ROUTER 2: > > > > Current configuration : 835 bytes > > ! > > version 12.2 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname r3620-2 > > ! > > ! > > ip subnet-zero > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > fax interface-type fax-mail > > mta receive maximum-recipients 0 > > ! > > ! > > ! > > ! > > interface FastEthernet0/0 > > ip address 165.128.2.2 255.255.255.0 > > duplex auto > > speed auto > > ! > > interface Serial0/0 > > no ip address > > shutdown > > ! > > interface ATM1/0 > > no ip address > > no atm ilmi-keepalive > > ! > > interface ATM1/0.1 multipoint > > ip address 165.128.100.2 255.255.255.0 > > map-group ip-Pvc > > atm pvc 121 0 121 aal5snap > > ! > > router eigrp 100 > > network 165.128.0.0 > > auto-summary > > no eigrp log-neighbor-changes > > ! > > ip classless > > ip http server > > ! > > ! > > map-list ip-Pvc > > ip 165.128.100.1 atm-vc 121 broadcast > > ! > > call rsvp-sync > > ! > > ! > > mgcp profile default > > ! > > dial-peer cor custom > > ! > > ! > > ! > > ! > > line con 0 > > line aux 0 > > line vty 0 4 > > ! > > ! > > end > > > > THANKS! > > > > Eddie > > > > -----Original Message----- > > From: Andre Riscalla [mailto:[EMAIL PROTECTED]] > > Sent: Sunday, July 21, 2002 2:36 PM > > To: Edward Sohn > > Cc: [EMAIL PROTECTED] > > Subject: Re: Lightstream PVC config problem... [7:49352] > > > > > > > > Edward, > > > > You are simply trying to define the same PVC mapping 2 times... > > Basically you need to see the mapping of a PVC in the LS1010 similar as > > a cross-connect - You only need to configure the cross-connect in ONE of > > the physical interface. > > > > For example, let's say you want to configure a PVC from port 12/0/0 > > (0/112) to port 12/0/2 (0/121) in your ATM switch. You would have 2 ways > > of doing this: > > > > Either: > > > > interface ATM12/0/0 > > no ip address > > atm pvc 0 112 interface ATM12/0/2 0 121 > > ! > > interface ATM12/0/2 > > no ip address > > ! Heya, > > > > > > I'm kinda new at the ATM bit, and I'm having trouble configuring an > > > L1010... > > > > > > I'm simply trying to perform the configuration as documented in Lab18 > > > in the CCIE Practical Studies book. I have two active ATM interfaces, > > > > > 12/0/0 and 12/0/2. > > > > > > As I go to enter in the first PVC command on 12/0/0, "atm pvc 0 112 > > > interface ATM12/0/2 0 121", I don't seem to have any problems. It's > > > on the corresponding PVC command that I get an error. When I enter in > > > > > the "atm pvc 0 121 interface ATM 12/0/0 0 112" command on the 12/0/2 > > > interface, i get an error stating, "%connection creation fails: > > > vpi/vci has been used by other connections." > > > > > > I tried this many times, without luck. I was simply configuring the > > > interfaces with the exact same commands as the book says. I looked on > > > > > CCO, but couldn't find anything regarding this... > > > > > > Anyone run into this before? > > > > > > Thanks in advance, > > > > > > Eddie > > > > > > [GroupStudy.com removed an attachment of type image/jpeg which had a > > > name of Notebook.jpg] > > Contrary to popular belief, Unix IS user friendly. It just happens to be > > very selective about who it decides to make friends with. > > > > ============================= > > Andre Riscalla > > Sr. Manager, Internet Backbone Technology and Services > > Network Architecture and Internet Services > > AT&T Canada Corp > > [EMAIL PROTECTED] > > Bus:514-940-5664 > > Cell:514-594-9614 > > Pager:514-930-7030 > > Rim:[EMAIL PROTECTED] > > ============================= Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49509&t=49352 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]