My pleasure John. Please keep us informed about the results of your implementation and if all is working fine, I'm very intersted in that kind of summarization in eigrp JohnZ wrote: > > Thank you David and Steven, I didn't even know the existence of > stub command > in Eigrp. I learn something new everyday here. Thanks again, > now I need an > IOS upgrade..... > ""David j"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I would added eigrp stub connected on spoke routers (I think > you need ios > > 12.0) if you don't do that, based in my experience, you're > going to have > > SIAs on your backbone. See the following link: > > > http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120 > limit/120s/120s15/eigrpstb.htm > > > > Steven, correct me if I'm wrong, but if you use ip default > network, all > > other routes are being announced anyway? > > > > Steven A. Ridder wrote: > > > > > > on the interface to the rest of the routers, do a ip eigrp > > > summary address > > > 00.0.00 0.0.0.0 > > > > > > or > > > > > > IP default network xx.x.x. > > > > > > > > > ""JohnZ"" wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > I have a 3640 as hub and 20 1604s as spokes. Eigrp is the > > > routing protocol > > > > in use. Internet access is through the 3640. How can > summrize > > > in Eigrp so > > > > all the spokes have a single route to the Hub router. > > > > Thanks, > >
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49811&t=49730 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
