You can configure separate queue thresholds for committed and excess traffic.
Configure the Be (excess) ECN threshold so that it is greater than or equal to zero and less than or equal to the Bc (committed) ECN threshold. Configure the Bc ECN threshold so that it is less than or equal to 100 - based on CIR. Bill Creighton CCNP Senior System Engineer Motorola iDEN CNRC Packet Data 1301 Algonquin Rd. Rm. 434 Schaumburg, IL 60193 Office: (847) 761-7069 Mobile: (847) 815-0436 Skytel: (877) 681-2614 [EMAIL PROTECTED] -----Original Message----- From: Davis, Scott [ISE/RAC] [mailto:[EMAIL PROTECTED]] Sent: Friday, August 09, 2002 9:18 AM To: [EMAIL PROTECTED] Subject: FR traffic shaping [7:51044] I am not clear on two of the settings when configuring a map-class. Frame-relay bc and be Are these values supplied by the carrier or a value that you can calculate yourself based on other parameters? TIA Scott Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51048&t=51044 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]