I haven't tried disabling pwrmngmt yet. I'll give it a shot and post the results. Thanks, Dain. ""Frank Jimenez"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Might want to review this: > > http://www.cisco.com/warp/public/473/46.html > > Power management was causing a bunch of issues at one of my customer's > sites. Might want to disable it and see if it helps any. > > Frank Jimenez, CCIE #5738 > [EMAIL PROTECTED] > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Dain Deutschman > Sent: Wednesday, August 14, 2002 10:26 PM > To: [EMAIL PROTECTED] > Subject: Re: Catalyst 2950 CRC Errors [7:51419] > > > Also...I have tested the wiring(basic tester...no NEXT/FEXT or other > factors...but lengths of cable are under 50ft) and replaced patch > cables...still no luck. Dain. > > ""Dain Deutschman"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hello Everyone, > > > > I have a Cat2950 in a small office throwing up thousands of CRCs, > > input errors and several runts on the port connected to the server. > > Clients are getting disconnected and database on server is constantly > > having to be repaired. The errors always follow the server no matter > > which port I move > it > > to. Have replaced NIC in server and a few key Wkst. Have also updated > > the NIC drivers. ( Win2000 w/3C905C-TX-M Nics ). I have forced speed > > and > duplex > > settings and disabled spanning-tree. I'm suspecting dirty power...but > > it > is > > connected to a UPS ( that only has limited EMI/RFI Filtering ). I > > connect > a > > 3Com unmanaged 8 port switch to the key clients and the server...no > > more problems. Any ideas?!? It's driving me nuts! Thanks in advance... > > -- > > Dain Deutschman > > CNA, MCP, CCNA > > Data Communications Manager > > New Star Sales and Service, Inc.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51556&t=51419 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]