Just curious, how are you handling "serialization delay", we to have 40 sites with a centralized CM enviorment on the Qwest VPN. Since Qwest doesn't yet support MLPPP we experience intermittent voice problems on WAN-to-WAN calls. Just vcurious.
Jim ""dj"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Has anyone deployed VoIP successfully across Qwest's WAN backbone? I > have 2 sites connected over Qwest's VPN service (consists of running > IPSec over Qwest's MPLS backbone). Qwest says they currently have no > QOS support in backbone, but the backbone has huge capacity (OC-192 > pipes), which Qwest asserts should support VoIP apps. Round trip ping > times across the WAN are typically 50 msec. > > I have the traditional VoIP problem of excessive jitter causing poor > voice quality. Currently have 2621 routers at each site running WFQ wth > Voice packets marked with IP precedence 5 for voice data, and IP > precedence 3 for voice control. I am considering re-configuring the > routers to run PQ-CBWFQ. > > If anyone has successfully got VoIP running successfully across this > Qwest's backbone, I would be interested in hearing your approach and > which config worked. Even though the Qwest WAN has huge capacity, but > no QOS support, can it really support real-time apps like VoIP??? > > thanks, > dj > > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=51867&t=51837 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
