Where does the 10.258.52.x network reside in your network? I'm guessing it also uses a 255.255.255.0 mask.
If there is a PC or PC's on one of the 1605 ethernet segments with a 10.258.52.x address then you will need to add a secondary IP address to the interface those devices are off of. This is also called a multinetted interface. interface e0 ip address 10.258.52.x 255.255.255.0 secondary If the 10.258.52.x is on another router in your network then you add a static route or enable a dynamic routing protocol between the routers. The static route next hop will be an adjancent router off one of the 1605 interfaces. Example: ip route 10.258.52.0 255.255.255.0 10.1.1.1.x where x is the other router on the 10.1.1.x/24 network. That router would also need routes back to the 1605 networks. HTH, Erick --- Craig Robertson wrote: > Hi guys, > I am having a problem with routing on a Cisco1605 > router. Ethernet0 is set > to 10.1.1.17 255.255.255.0 and ethernet1 is set to > 10.128.52.1 255.255.255.0 > My problem is: > > From the 10.1.1.0 network i can ping 10.1.1.17 > (ethernet0) > From the 10.1.1.0 network i can ping 10.128.52.1 > (ethernet1) > From the 10.1.1.0 network I can NOT ping > 10.258.52.101 (pc on subnet) > > I have enabled ip routing on the router, however, > nothing has changed. > > Can anyone please advise of the command(s) for a > static route, if indeed > this is the problem. Any suggestions would be > appreciated. > > Thanks __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52344&t=52340 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]