Use the area 3 default command on the abr router you want the traffic to go over, this will get injected into the stub area
Both Abr's will inject 0.0.0.0 in to the stub, buf you can influence using this command.. Which will be the prefered route out, + u could also use the summary command on the other router for certain traffic to go through this one Kind regards. Paul. -------------------------- Sent from my BlackBerry Wireless Handheld -----Original Message----- From: Lee Messenger To: [EMAIL PROTECTED] Sent: Fri Sep 06 12:00:36 2002 Subject: OSPF Stub area [7:52781] Hi, I have a network (Area 3) that has 2 connections to my OSPF area 0. One via 2mb ATM the other via VPN. I would like to configure this as a stub area, however, with multiple exit points, will my traffic go via the ATM or VPN or both. I would prefer the route via ATM, and only use VPN if ATM goes down. What do I need to do to achive this ? Regards LM **************************************************************************************** This E-mail is from O2. The E-mail and any files transmitted with it are confidential and may also be privileged and intended solely for the use of the individual or entity to whom they are addressed. Any unauthorised direct or indirect dissemination, distribution or copying of this message and any attachments is strictly prohibited. If you have received the E-mail in error please notify [EMAIL PROTECTED] or telephone ++ 353 1 6095000. ***************************************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52784&t=52781 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]