I am trying this in the lab, so....... "clear ip route *" doesn't work. I have tried clearing both the "neigh" and the "route", no effect at all.
The way I can make authentication works is configure it from the beginning, before Router A and B have any neighbour relationship. E.D. ----- Original Message ----- From: ""Dain Deutschman"" Newsgroups: groupstudy.cisco Sent: September 18, 2002 12:43 AM Subject: Re: EIGRP authentication. [7:53513] > Maybe this is wrong...and not the best thing to do in a production > network...but would a "clear ip route *" do the trick? I think the problem > is that the routes already exist in the routing table...clearing the > neighbor relationship may not have an effect. I may be off base...please > correct me if that is the case. Dain. > > ""enginedrive2002"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > If Router A and Router B are connected using serial interface, both of > them > > are running EIGRP. > > > > On Router A, I have configure "ip authentication mode eigrp AS# md5" and > "ip > > authentication key-chain eigrp AS# " under interface > > configuration mode, also configure the "key chain", "key-string" under > > global configuration mode. > > > > On Router B, I didn't nothing with EIGRP authentication. Router A and B > > suppose should not be able to set up neighbour relationship, but now > Router > > A and Router can see each other while running "show ip eigrp neighbour", > the > > subnet information of Router A also appear in Router B routing table, and > > vice versa. > > > > Any configuration commands I missed? What debug command I can use to > verify > > the authentication is working or not? > > > > Thank you for your input! > > > > > > E.D. > > > > > > > > ______________________________________________________________________ > > Post your ad for free now! http://personals.yahoo.ca Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53540&t=53513 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
