Hi, I am setting up 2511 terminal server for my first time, but don't work...
this is my 2511 configuration : -------------------- line con 0 line 1 16 session-timeout 20 exec-timeout 0 0 line aux 0 line vty 0 4 password login -------------------- In above, i found i missed one command in "line con 0" prompt. --> line con 0 transport input all So, i tried to type the command, but couldn't. The result is -------------------------------------------------------------- Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#line con 0 Router(config-line)#transport input all ^ % Invalid input detected at '^' marker. Router(config-line)# -------------------------------------------------------------- I don't know why the command can't be input. There is the command In cisco documentation. (http://www.cisco.com/warp/public/793/access_dial/comm_server.html) Anyone can help me? sooil.. [TABLE NOT SHOWN][TABLE NOT SHOWN][IMAGE] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53791&t=53791 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]