Sort of. You get someone to find and read the serial number to you. You then put it somewhere in the config where it can be retrieved. A banner can be used but could be a security issue. One neat trick is to create a named access list. Then put the SN in a remark line.
ip access-list standard Serial_Number remark This router's S/N JAB00000000 > -----Original Message----- > From: CTM CTM [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 25, 2002 3:58 PM > To: [EMAIL PROTECTED] > Subject: Remote Serial # Retrieval [7:54120] > > > Hello all, > > Have inherited 4 routers with no documentation as to vendors, > maintenance > agreements etc. I have established a maintenance agreement is > in place for > at least one router and now need to establish for the other > boxes. I only > have physical access to one of the routers, the other three are out of > country. I have full telnet access and am hoping I can > retrieve the serial > numbers that way. I tried a "sh ver" (just hoping for dumb > luck) but no go. > > Is it possible to extract the router's serial from the command line? > > Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54128&t=54120 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
