Better yet, use: snmp-server chassis-id SERIAL#
Andrew ""Daniel Cotts"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Sort of. You get someone to find and read the serial number to you. You then > put it somewhere in the config where it can be retrieved. A banner can be > used but could be a security issue. One neat trick is to create a named > access list. Then put the SN in a remark line. > > ip access-list standard Serial_Number > remark This router's S/N JAB00000000 > > > -----Original Message----- > > From: CTM CTM [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, September 25, 2002 3:58 PM > > To: [EMAIL PROTECTED] > > Subject: Remote Serial # Retrieval [7:54120] > > > > > > Hello all, > > > > Have inherited 4 routers with no documentation as to vendors, > > maintenance > > agreements etc. I have established a maintenance agreement is > > in place for > > at least one router and now need to establish for the other > > boxes. I only > > have physical access to one of the routers, the other three are out of > > country. I have full telnet access and am hoping I can > > retrieve the serial > > numbers that way. I tried a "sh ver" (just hoping for dumb > > luck) but no go. > > > > Is it possible to extract the router's serial from the command line? > > > > Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54130&t=54120 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]