""Christopher Dumais"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello all, > I have an ISDN line set up for vendor support. It is dedicated to one > vendor. They are always the one to initiate the call, their system does not > allow incoming calls. They are telling me that I have to set the thresholds > on my router(Cisco 2620). I have never heard of the receiving side asking > for the second connection and can't find any commands either. The only > command I see is the dialer load-threshold command and that's for dial out. > Am I missing something? Any thought? Thanks in advance!
This sort of thing is possible using Bandwidth Allocation Protocol (RFC2125). Try this CCO URL for config info (mind the wrap)... The option you're interested in is "ppp bap callback request". http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_ c/dcbacp.htm This is assuming that they are configured for BAP/BACP at their end though, they may just be plain wrong in what they're asking you to do :) -- Russell Heilling http://www.ccie.org.uk/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54361&t=54356 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
