You can use dialer-load threshold for incoming traffic as well.
""Christopher Dumais"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello all, > I have an ISDN line set up for vendor support. It is dedicated to one > vendor. They are always the one to initiate the call, their system does not > allow incoming calls. They are telling me that I have to set the thresholds > on my router(Cisco 2620). I have never heard of the receiving side asking > for the second connection and can't find any commands either. The only > command I see is the dialer load-threshold command and that's for dial out. > Am I missing something? Any thought? Thanks in advance! > > Chris Dumais, CCNP, CNA > Sr. Network Administrator > NSS Customer and Desktop Services Team > Maine Medical Center > (207)871-6940 > [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54388&t=54356 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
