Dear Group, i m facing a piculiar problem. i have 2 cat 6509's switches as CORE connected back to back. Both the switches has 2 MSFC's (total four) as a redundent. I have configured HSRP between them and even enabled MLS on both the switches.
I have followed proper Cisco documentation for configuring MLS in cat6k environment. However when I am giving command "sh mls rp ip" on both my active MSFC's , it does not show the switch's mac address. When I issue command "sh mls" on the switch , it shows the MSFC15 as the designated router learned with some Vlan's MAC addresses as well. The output of "sh mls rp ip" on MSFC looks like this :- router currently aware of following 0 switch(es): no switch id's currently exists in domain can anybody help me debug this ?? DISCLAIMER: Information contained and transmitted by this E-MAIL is proprietary to Wipro Limited and is intended for use only by the individual or entity to which it is addressed, and may contain information that is privileged, confidential or exempt from disclosure under applicable law. If this is a forwarded message, the content of this E-MAIL may not have been sent with the authority of the Company. If you are not the intended recipient, an agent of the intended recipient or a person responsible for delivering the information to the named recipient, you are notified that any use, distribution, transmission, printing, copying or dissemination of this information in any way or in any manner is strictly prohibited. If you have received this communication in error, please delete this mail & notify us immediately at [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54531&t=54531 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]