I am just trying to think of how to restrict Hubs from being used in the LAN. Politically it's a mess and despite a lot of discussions certain people are able to add hubs at will where ever they want. So I was trying to think of a way to stop that within the switch. Now normally these ports that the hubs are connected to show several mac addresses when I do "show cam" which gives me an idea is there any way to restrict host ports to only accept one mac-address. I don't want to hardcode the mac-address because that would be too much a administrative burden. But if I could restrict the port to accept just one mac-address then that will make these hubs useless. Well anyways let me know if I am way off here but are there any other tricks in use by any of you guys. I'll appreciate any pointers. JZ
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54937&t=54937 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]