I have 4 interfaces: Serial 0/1 - public IP for example 1.1.1.1 fast 0/1 -public IP for example 2.2.2.2 fast 0/0 -LAN IP : 192.168.1.1/24 My ip address pool for VPN : 192.168.1.170-192.168.1.190 On VPN padlock i haver Ip address from router for example 192.168.1.170 but I can't ping any address on LAN. I don't know I am using the newest VPN Client : vpnclient-win-is-3.6.3.Rel-k9 I have ip nat inside on Fast 0/0 and outside on ser 0/1 but without doesn't work to :(.
Ben Woltz wrote: > The IP address that your VPN Client gets from the router, are you > advertising that route through your network? > > ""JM"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > >>Hello >>I am trying to run VPN beetwen VPN Client 3.6.2.A and Cisco 2651. >>On Cisco router I have: >>Software with 3DES/IP PLus/FW/IDS - Version 12.2(11)T2 >>Router has 4 interfaces: >>serial 0/1 - Internet here I gave cryptomap >>fasteth 0/1 -DMZ >>fasteth 0/0 -LAN ( here I want to be tgrough VPN) >>I have the same configuration like in TAC help : >>http://www.cisco.com/warp/customer/471/ipsecrouter_vpn.html >>VPN Client can login inside router, and I have ipaddress from router, >>but I don't see anything. I can't ping. >>I have question ? >>Where am Im inside the router ? I am in, but I don't see anything. >>When I will have : ip access-list out on fast0/0 (LAN) what should I >>enable ? I have nat inside on fast 0/0 and outside on ser 0/1 >>Regards >>JM Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59318&t=59283 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
