-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

For example in 

http://www.cisco.com/warp/public/707/ios_usr_rad.html

Is, like I said, ANOTHER ip range used than in the LAN.

Configuring Router to VPN Client, Mode-Config, Wild-Card Pre-Shared Key with
NAT
http://www.cisco.com/warp/public/707/25.shtml

Speaks of

interface Serial1
ip address 10.2.2.1 255.255.255.0
no ip directed-broadcast
ip nat inside
!
And
 ip local pool ourpool 10.2.1.1 10.2.1.254

So diff ip ranges works.

Than
!--- Except the private network to private network traffic 
!--- from the NAT process.
access-list 101 deny ip 10.2.2.0 0.0.0.255 10.2.1.0 0.0.0.255
access-list 101 permit ip 10.2.2.0 0.0.0.255 any

route-map nonat permit 10
match ip address 101



Martijn


- -----Oorspronkelijk bericht-----
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Namens JM
Verzonden: maandag 16 december 2002 12:35
Aan: [EMAIL PROTECTED]
Onderwerp: VPN Client+IOS [7:59283]


Hello
I am trying to run VPN beetwen VPN Client 3.6.2.A and Cisco 2651. On Cisco
router I have: Software with 3DES/IP PLus/FW/IDS - Version 12.2(11)T2 Router
has 4 interfaces: serial 0/1 - Internet here I gave cryptomap fasteth 0/1
-DMZ fasteth 0/0 -LAN ( here I want to be tgrough VPN) I have the same
configuration like in TAC help :
        http://www.cisco.com/warp/customer/471/ipsecrouter_vpn.html
VPN Client can login inside router, and I have ipaddress from router, 
but I don't see anything. I can't ping.
I have question ?
Where am Im inside the router ? I am in,  but I don't see anything. When I
will have : ip access-list out on fast0/0 (LAN) what should I
enable ? I have nat inside on fast 0/0 and outside on ser 0/1 Regards JM
Version: PGP 8.0

iQA/AwUBPhoJc3dq56XWk+VyEQK89gCg3+KCCkku2715DESXMZKofwxptnsAoMdU
Y0VwPf1Hyx9CaBuNqOreI30C
=vomy
-----END PGP SIGNATURE-----




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60466&t=59283
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to