It's probably misconfigured. What is the config of this router and the other router?
Wei Zhu wrote: > > I also tried "debug serial interface", only see myseq , other > side are always 0, also the "show interface serial" shows the > number interface resets and carrier transition are increasing > all the time. > > Thanks > > ----- Original Message ----- > From: "Wei Zhu" > To: "Leo Song" ; > Sent: Wednesday, December 18, 2002 6:37 PM > Subject: Re: 2514 serial port flipping between up and down, hel > [7:59426] > > > > Actually I am using DCE/DTE back to back connecting to > another router(which is tested good), the line protocol is up > and down continuously and count for interface resets is > increasing all the time, does that mean the serial ports are bad? > > > > Thanks > > > > ----- Original Message ----- > > From: "Leo Song" > > To: "'Wei Zhu'" ; > > Sent: Wednesday, December 18, 2002 11:50 AM > > Subject: RE: 2514 serial port flipping between up and down, > hel [7:59426] > > > > > > > Did you try to replace the v.35 cable? > > > > > > Leo > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > On Behalf Of > > > Wei Zhu > > > Sent: Wednesday, December 18, 2002 9:45 AM > > > To: [EMAIL PROTECTED] > > > Subject: 2514 serial port flipping between up and down, hel > [7:59426] > > > > > > Just got one from eBay, the AUI is OK, but could not get > the serials > > > work, > > > tried different speed, sometime at 56000 worked but not > stable, other > > > speed > > > didn't work at all. Any suggestion? > > > > > > Thanks > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59503&t=59501 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]