you sourcing clock from one side of this or tried another cable?
Brian
----- Original Message -----
From: "Wei Zhu"
To:
Sent: Wednesday, December 18, 2002 6:11 PM
Subject: Re: 2514 serial port flipping between up and down, [7:59501]
> I also tried "debug serial interface", only see myseq , other side are
> always 0, also the "show interface serial" shows the number interface
resets
> and carrier transition are increasing all the time.
>
> Thanks
>
> ----- Original Message -----
> From: "Wei Zhu"
> To: "Leo Song" ;
> Sent: Wednesday, December 18, 2002 6:37 PM
> Subject: Re: 2514 serial port flipping between up and down, hel [7:59426]
>
>
> > Actually I am using DCE/DTE back to back connecting to another
> router(which is tested good), the line protocol is up and down
continuously
> and count for interface resets is increasing all the time, does that mean
> the serial ports are bad?
> >
> > Thanks
> >
> > ----- Original Message -----
> > From: "Leo Song"
> > To: "'Wei Zhu'" ;
> > Sent: Wednesday, December 18, 2002 11:50 AM
> > Subject: RE: 2514 serial port flipping between up and down, hel
[7:59426]
> >
> >
> > > Did you try to replace the v.35 cable?
> > >
> > > Leo
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of
> > > Wei Zhu
> > > Sent: Wednesday, December 18, 2002 9:45 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: 2514 serial port flipping between up and down, hel [7:59426]
> > >
> > > Just got one from eBay, the AUI is OK, but could not get the serials
> > > work,
> > > tried different speed, sometime at 56000 worked but not stable, other
> > > speed
> > > didn't work at all. Any suggestion?
> > >
> > > Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59504&t=59501
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
