This may be dumb question, but I have seen this happen when connecting a high speed port to a low speed port. One side is default to 1544 and the other cannot do better than 64K.
So, what are you connecting to, specifically - 2514 to 2522? Again, I might not be in the loop, but thought I would put my two cents in here. I did experience the exact same problem and my fix was to set the right speed on the 2501 to connect to a low speed router interface on a 2522. Ted Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59558&t=59501 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]