The tacacs config has not been changed. Neither on the router, nor the server. Besides on the router, I don't get the Call Handle error.
Any comments? Hamid > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > I do not have lots of debug experience in that area, but maybe can help > a little. > > The message > > Call Handle failed for Modem 5/2 > Does not seem to worry, see > > Configuring Dialin with the NM-8AM or NM-16AM Analog Modem Module > Sample Debugs Output > http://www.cisco.com/warp/public/471/nm-xam_dialin.html#9 > Where it is standard debug output for a succeeded call. > > The message > Received authen response status FAIL (3) > > Does worry me. Triple check that nothing changed in the radius/tacacs > config. > > Common Problems in Debugging TACACS+, PAP and CHAP > http://www.cisco.com/warp/public/480/tacacs_pppdebug.html > > Martijn > > - -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Namens Hamid > Ali Asgari Verzonden: zaterdag 18 januari 2003 8:34 > Aan: [EMAIL PROTECTED] > Onderwerp: URGENT: Modem Authentication Failure [7:61292] > > > Hi everybody, > > Today I have encountered a strabge problem. I have a 3660 router with > NM-16AM modules. Nothing has been changed. Suddenly we got complains > from users tht they cannot connect. I have checked the AAA server. But > there is nothing wrong. Here is my debug log: - > ------------------------------------------------------- > Call Handle failed for Modem 5/2 > %LINK-3-UPDOWN: Interface Async163, changed state to up > TPLUS: Queuing AAA Authentication request 634 for processing > TPLUS: processing authentication start request id 634 > TPLUS: Authentication start packet created for 634(testuser) > TPLUS: Using server XY.XY.XY.250 > TPLUS(0000027A): connected to server XY.XY.XY.250 > TPLUS: response received for AAA request 634 > TPLUS: Received authen response status FAIL (3) > %LINK-5-CHANGED: Interface Async163, changed state to reset > %LINK-3-UPDOWN: Interface Async163, changed state to down > > Call Handle failed for Modem 5/2 > %LINK-3-UPDOWN: Interface Async163, changed state to up > TPLUS: Queuing AAA Authentication request 637 for processing > TPLUS: processing authentication start request id 637 > TPLUS: Authentication start packet created for 637(testuser) > TPLUS: Using server XY.XY.XY.250 > TPLUS(0000027D): connected to server XY.XY.XY.250 > TPLUS: response received for AAA request 637 > TPLUS: Received authen response status FAIL (3) > %LINK-5-CHANGED: Interface Async163, changed state to reset > > - ------------------------------------------------------- > Any comments? > > I couldn't find what the FAIL(13) error code means. And also I don't > know what causes "Call Handle failed for Modem 5/2". I get this for a > lot of my modems on my console.Thanks in advance, Hamid > Nondisclosure violations to [EMAIL PROTECTED] > > -----BEGIN PGP SIGNATURE----- > Version: PGP 8.0 > > iQA/AwUBPikla3dq56XWk+VyEQKphACfa6B8lpmTQ3Yt6D18Vb8Kxk6aEdUAoNbu > ITDsRaSUCQlsXdkQFM5zARCH > =EO/E > -----END PGP SIGNATURE----- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61296&t=61292 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]