Hi I want to configure my 2610 for frame relay into my telco. Then clients from all over will connect with frame relay through the telco into my 2610. Now i need to have 2 pvc`s per client.One will terminate on my 2610 and the other pvc needs to be switched through my 2610 and terminated on another router.The clients routers will not be cisco though. I will obviously have to use sub interfaces for the different clients. I am just unsure how i will terminate the 1 pvc on my 2610 and at the same time frame switch the other pvc to another router
Thanks ""Julian P"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi guys > > I am wandering if it is possible to configure my cisco 2610 for seperate > frame relay point to point subinterfaces with the ip terminating on the > 2610,and have the 2610 frame switch some other dlci`s and terminate the ip > on another frame relay device at the same time. > > Any advice is appreciated > > Thanks > Julian Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61761&t=61757 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
