Thank you guys for your help. I did a search on Cisco and came up with a good article.
-----Original Message----- From: Michael Williams [mailto:[EMAIL PROTECTED]] Sent: Monday, January 27, 2003 4:52 PM To: [EMAIL PROTECTED] Subject: Re: Inquiring Minds want to know [7:61985] Exactly. I don't have it off the top of my head, but there's an article on Cisco site talking about this. Basically, if both ends are autodetect, you should get 100/Full. The main thing to be careful of is when one end if auto and the other is forced to full duplex (regardless of speed). There's a problem with duplex autodetection when the other end is forced, and so the autodetect will default to half, which is fine if the end that's forced is forced to half, but not if it's forced to full. So basically, the main scenario where you can get bit is if one end if auto and the other is forced to full (i.e. you *will* end up with a duplex mismatch). All other situations will resolve themselves properly. Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61995&t=61985 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]