If it is a loopback address lets say 192.168.1.2 255.255.255.252 the router will see the netblock local to the router. Lets say the other end is 192.168.1.1 255.255.255.252 Point-to-point. Try putting a route statement ip route 192.168.1.1 255.255.255.255 out the interface. This creates a more specific route for that IP.
Daniel Ladrach CCNP,CCNA WorldCom -----Original Message----- From: Deepak N [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 29, 2003 4:07 PM To: [EMAIL PROTECTED] Subject: IP unnumbered for HDLC connection [7:62134] HI All I have simple configuration of HDLC connected back to back. If i give ip unnumbered at one end and the static ip address at the other end, I cant ping the either end. But when i give show ip int brief, it shows the line and protocol are up. If i give ip unnumbered at both ends, now i am able to ping either end. could anybody help me out in this. Regards Deepak Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62181&t=62134 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
