Use rate-limit instead. HTH, Hamid
> Hi, > > the bandwidth command is for information only. It does not > change the interface. It is used by routing protocols like EIGRP > to evaluate the metric and to compare different links. For > serial links the default is 1544 kbps (=T1 line) and on other > interfaces the default is the link speed (e.g. 100000 kbps for > FastEthernet). > > Jens Neelsen > > --- Projet AIM wrote: >> Hi all, >> >> I am working on a cisco 3620 router and I am trying to limit >> bandwidth on >> the FastEthernet interface with the Bandwidth command but I >> still have a >> superior rate than the one I choose can anyone please help me >> ( I have the IOS version 12.2) >> >> sincerly >> PIPPOO >> >> >> > _________________________________________________________________ >> Gagnez 1 appareil photo num. en envoyant KDO par SMS au 61321 >> (prix dun >> SMS+ 0.35) http://www.msn.fr/jeux/kdo/ > [EMAIL PROTECTED] > Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63161&t=63154 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]