With 12.2 use the police command within a policy map not rate-limit HTH
Dom Stocqueler -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] Sent: 17 February 2003 16:27 To: [EMAIL PROTECTED] Subject: Re: Bandwidth limitation [7:63154] Use rate-limit instead. HTH, Hamid > Hi, > > the bandwidth command is for information only. It does not change the > interface. It is used by routing protocols like EIGRP to evaluate the > metric and to compare different links. For serial links the default is > 1544 kbps (=T1 line) and on other interfaces the default is the link > speed (e.g. 100000 kbps for FastEthernet). > > Jens Neelsen > > --- Projet AIM wrote: >> Hi all, >> >> I am working on a cisco 3620 router and I am trying to limit >> bandwidth on the FastEthernet interface with the Bandwidth command >> but I still have a >> superior rate than the one I choose can anyone please help me >> ( I have the IOS version 12.2) >> >> sincerly >> PIPPOO >> >> >> > _________________________________________________________________ >> Gagnez 1 appareil photo num. en envoyant KDO par SMS au 61321 (prix >> dun >> SMS+ 0.35) http://www.msn.fr/jeux/kdo/ > [EMAIL PROTECTED] > Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63249&t=63154 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]