try debug isdn q931, this may give you some more info.

   Dave

Cisco Nuts wrote:
> Hello, Just set up basic Isdn b/w 2 routers using the default hdlc encap
> and was working perfectly fine till I changed the encap to ppp, ppp auth
> chap, ppp multilink and ppp chap hostname R7. Then it just stopped
> working     :- out this msg. on the screen:R8-G#
> 4d19h: %ISDN-4-INVALID_CALLEDNUMBER: Interface BR0, Ignoring call, LDN
> and Called Party Number mismatch I looked to see if the called number had
> changed even though I had not touched it. It is still valid and so are
> the spids. R8-G#ri b0
> Building configuration...Current configuration : 353 bytes
> !
> interface BRI0
>  ip address 9.9.9.1 255.255.255.0
>  ip ospf demand-circuit
>  dialer idle-timeout 90
>  dialer map ip 9.9.9.1 broadcast 5553000
>  dialer load-threshold 1 outbound
>  dialer-group 1
>  isdn switch-type basic-ni
>  isdn spid1 0555100001 5551000
>  isdn spid2 0555200001 5552000
> R8-G#sh is st
> TEI
> Global ISDN Switchtype = basic-niter      Age         Seq#       C
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 123, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI = 124, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI 123, ces = 1, state = 5(init)
> spid1 configured, spid1 sent, spid1 valid
> Endpoint ID Info: epsf = 0, usid = 1, tid = 1
> TEI 124, ces = 2, state = 5(init)
> spid2 configured, spid2 sent, spid2 valid
> Endpoint ID Info: epsf = 0, usid = 3, tid = 1
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> CCB:callid=801C, sapi=0, ces=1, B-chan=1, calltype=DATA
> Active dsl 0 CCBs = 1
> The Free Channel Mask:  0x80000002
> Total Allocated ISDN CCBs = 1 I am beginning to guess that the problem is
> a HARDWARE one with the ISDN switch being the culprit. I guess as usual I
> need to give it rest for a couple of hours and start it again for this to
> work with just HDLC encap.  To think that I was told that the Merge
> switch was the Rolls Royce of ISDN switches when I paid a "million" $$
> for it last year :-(But if any one has any suggestions/advice, I would
> gratefully appreciate it.Thank you.Sincerely,CN
> 
> ------------------------------------------------------------------------
> 
> STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

"You don't make the poor richer by making the rich poorer." --Winston
Churchill




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63264&t=63255
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to